Huawei OptiX RTN 980 radio SDH/PDH microwave equipment

Huawei OptiX RTN 980 radio SDH/PDH microwave equipment


Quick Details

Place of Origin:Guangdong China (Mainland)Brand Name:HUAWEIModel Number:RTN980

Specifications

1. SDH / PDH microwave
2. High-capacity SDH microwave supporting XPIC
3. Integrated IP microwave supporting XPIC
HUAWEI OptiX RTN 900 Series Network Application
The OptiX RTN 900 is a new generation TDM/Hybrid/Packet integrated microwave transmission system developed by Huawei. It provides a seamless microwave transmission solution for mobile communication network or private networks.
OptiX RTN 900 Product Family
There are four types of OptiX RTN 900 V100R005C00 products: OptiX RTN 905, OptiX RTN 910, OptiX RTN 950, and OptiX RTN 980. Users can choose the product best suited for their site. 
· The IDU of the OptiX RTN 905 is 1U high, integrated and case-shaped. The OptiX RTN 905 can provide two types of IDU: IDU 905 1A with one IF port and IDU 905 2A with two IF ports.
· The IDU of the OptiX RTN 910 is 1U high and supports one or two IF boards.
· The IDU of the OptiX RTN 950 is 2U high and supports one to six IF boards.
· The IDU of the OptiX RTN 980 is 5U high and supports one to fourteen IF boards.
The OptiX RTN 900 series provide a variety of service interfaces and can be installed easily and configured flexibly. The OptiX RTN 900 series provide a solution that can integrate TDM microwave, Hybrid microwave, and Packet microwave technologies according to the networking scheme for the sites, achieving smooth upgrade from TDM microwave to Hybrid microwave, and from Hybrid microwave to Packet microwave. This solution meets the transmission requirements of 2G, 3G, and LTE services while also allowing for future network evolution and convergence.

1. Network Application
The OptiX RTN 900 is a new generation TDM/Hybrid/Packet integrated microwave transmission system developed by Huawei. It provides a seamless microwave transmission solution for mobile communication network or private networks.

The OptiX RTN 900 series provide a variety of service interfaces and can be installed easily and configured flexibly. The OptiX RTN 900 series provide a solution that can integrate TDM microwave, Hybrid microwave, and Packet microwave technologies according to the networking scheme for the sites, achieving smooth upgrade from TDM microwave to Hybrid microwave, and from Hybrid microwave to Packet microwave. This solution meets the transmission requirements of 2G, 3G, and LTE services while also allowing for future network evolution and convergence.
There are five types of OptiX RTN 900 V100R005C01 products: OptiX RTN 905, OptiX RTN 910, OptiX RTN 950, OptiX RTN 950A, and OptiX RTN 980. Users can choose the product best suited for their site.

OptiX RTN 980

The OptiX RTN 980 is large-capacity nodal microwave equipment deployed at the convergence layer. It supports the convergence of up to 14 radio links, and supports multiple protection schemes. Figure 1-1 shows the microwave transmission solution provided by the OptiX RTN 980.

NOTE:
  • The OptiX RTN 980 provides a wide range of interfaces and service bearer technologies to adapt to the regional backhaul network. The regional backhaul network can be a time-division multiplexing (TDM) network or packet switching network (PSN).
  • The OptiX RTN 980 supports the Ethernet over SDH (EoSDH) function, Ethernet over PDH (EoPDH) function, and ML-PPP function. Therefore, packet services can be backhauled through a TDM network.
  • The OptiX RTN 980 supports the pseudo wire emulation edge-to-edge (PWE3) technology. Therefore, TDM, ATM, and Ethernet services can be backhauled through a PSN.
  • The OptiX RTN 980 supports the VLAN sub-interface function. Therefore, MPLS packet services can be backhauled through a Layer 2 network.

IDU 980

The IDU 980 is the indoor unit for an OptiX RTN 980 system. It receives and multiplexes services, performs service processing and IF processing, and provides the system control and communications function.
Table 1-2 lists the basic features of the IDU 980.
Table 1-2 Features of the IDU 980
ItemDescription
Chassis height5U
PluggableSupported
Number of radio directions1 to 14
RF configuration mode
  • 1+0 non-protection configuration
  • N+0 non-protection configuration
  • Nx(+0) non-protection configuration
  • 1+1 protection configuration
  • N+1 protection configuration (N ≤ 7)
  • XPIC configuration
Service interface type
  • E1 interface
  • STM-1 optical/electrical interface
  • STM-4 optical interface
  • FE optical/electrical interface
  • GE optical/electrical interface
ODU
The ODU is the outdoor unit for the OptiX RTN 900. It converts frequencies and amplifies signals.
The OptiX RTN 900 product series can use the RTN 600 ODU and RTN XMC ODU, covering the entire frequency band from 6 GHz to 42 GHz.
NOTE:
Unlike the other frequency bands that use 14 MHz, 28 MHz, or 56 MHz channel spacing, the 18 GHz frequency band uses 13.75 MHz, 27.5 MHz, or 55 MHz channel spacing.

 RTN XMC ODUs that the OptiX RTN 980supports
ItemDescription
High-Power ODULow Capacity ODU
ODU typeXMC-2XMC-1
Frequency band6/7/8/11/13/15/18/23/26/28/32/38/42 GHz7/8/11/13/15/18/23 GHz
Microwave modulation schemeQPSK/16QAM/32QAM/64QAM/128QAM/256QAM/512QAM/1024QAM (6/11/13/15/18/23/26/28/32/38/42 GHz)
QPSK/16QAM/32QAM/64QAM/128QAM/256QAM (7/8 GHz)
QPSK/16QAM
Channel spacing7/14/28/40/50/56 MHz3.5/7/14/28 MHz
 RTN 600 ODUs that the OptiX RTN 980 supports
ItemDescription
High-Power ODUStandard Power ODULow Capacity ODU
ODU typeHP, HPASP, SPALP
Frequency band6/7/8/10/10.5/11/13/15/18/23/26/28/32/38 GHz (HP ODU)
6/7/8/11/13/15/18/23 GHz (HPA ODU)
7/8/11/13/15/18/23/26/38 GHz (SP ODU)
6/7/8/11/13/15/18/23 GHz (SPA ODU)
7/8/11/13/15/18/23 GHz
Microwave modulation schemeQPSK/16QAM/32QAM/64QAM/128QAM/256QAMQPSK/16QAM/32QAM/64QAM/128QAM/256QAMQPSK/16QAM
Channel spacing7/14/28/40/56 MHz (6/7/8/10/11/13/15/18/23/26/28/32/38 GHz)
7/14/28 MHz (10.5 GHz)
3.5/7/14/28 MHz3.5/7/14/28 MHz
There are two methods for mounting the ODU and the antenna: direct mounting and separate mounting.

The ODU is the outdoor unit for the OptiX RTN 900. It converts frequencies and amplifies signals.
The OptiX RTN 900 product series can use the RTN 600 ODU and RTN XMC ODU, covering the entire frequency band from 6 GHz to 42 GHz.

 Radio Link Types
The OptiX RTN 980 provides the radio links of various types in which different IF boards and ODUs are configured for diverse microwave application scenarios.
Table 1-5 Radio link types that the OptiX RTN 980 supports
Radio Link TypeSystem Control, Switching, and Timing BoardIF BoardODU
Low-capacity PDH microwaveCSHNIF1Low capacity for PDH ODU
SDH/PDH microwaveCSHNIF1Standard power ODU or high power ODU
High-capacity SDH microwaveCSHNISU2 ISV3Standard power ODU or high power ODU
High-capacity SDH microwave supporting XPICCSHNISX2 ISV3Standard power ODU or high power ODU
Integrated IP microwaveCSHNIFU2
ISU2
ISV3
Standard power ODU or high power ODU
Integrated IP microwave supporting XPICCSHNIFX2
ISX2
ISV3
Standard power ODU or high power ODU

No comments

Powered by Blogger.